Hengshui Silicon Monoxide Factory

colorlin1.gif (7770 bytes)

Chinese Ver

Hengshui Silicon Monoxide Factory specializes in manufacturing silicon monoxide (SIO) in China. As we use very special equipment and latest technology in production, we can offer reliable quality Silicon Monoxide at the lowest cost. Our silicon monoxide products are now selling well in both domestic and overseas market.

 

Our silicon monoxide (SiO) has been analyzed by China national first class laboratory test organization,that is Beijing Chemical Factory Beijing Precision Chemical Products Co.,Ltd. and most of index has passed 99.99% standard.

pm_ico1.gif (135 bytes)Brief Introduction of Silicon Monoxide (SiO):

Silicon monoxide, SiO, is an amorphous solid, with similar hardness with silicon. Silicon monoxide is brown in powder or pressed form and black in granular or lump form. SiO is stable at room temperature, but at temperatures of 400-700°C, SiO can be decomposed into silicon oxide and silicon. Silicon Monoxide is a highly desirable coating material due to its high deposition rate and ease of evaporation using low cost resistance-heated coating systems. Silicon monoxide is also noted for its excellent environmental stability.

 

pm_ico1.gif (135 bytes)Applications of Silicon Monoxide (SIO): Silicon Monoxide is mainly used in optical and thin film coating. SiO can be coated on plastics, glass and other substrates. Please refer to information below to learn details.
  • Optical:Silicon monoxide (SIO) coatings are used for optical applications in reflectors, flood lamps, mirrors, jewelry, and other products. Silicon monoxide coatings can reduce reflection in the near infrared range or act as interference layers. Silicon monoxide is also ideal for use with ZnS and other materials for reflective coatings. The layers of silicon monoxide formed in oxygen atmosphere (Si203) are used for antireflection coatings or interference coatings for ray splitting in the visible range.
  • Electronic:Silicon monoxide films are used in thin-film capacitors, hybrid circuits, semiconductor components, and other electronic applications. A variety of insulating and dielectric properties can be achieved by proper selection of silicon monoxide film thickness.
  • Protective:Silicon monoxide (SIO) films are deposited on aluminum surface mirrors, lenses and gratings to protect against corrosion and wear.
  • Experimental:New uses for silicon monoxide (SIO) are being discovered on an ongoing basis. Consequently, the demands for new forms or purities of silicon monoxide (SiO) are also changing.We will continue our effort in developing new purity silicon monoxide to meet customers' changing requirements.

 

pm_ico1.gif (135 bytes)Preparation of Silicon Monoxide (SiO):Silicon monoxide is generally prepared by condensing the vapor formed when pure silicon and pure quartz are reacted in a vacuum at high temperatures. The purity of the final silicon monoxide (SiO) product is determined by the starting materials and reaction procedures used. Depending on the temperature of the collector, the finished silicon monoxide (SiO) will range from lightweight, brown-to-black porous pieces to a dense, black glassy material.

 

pm_ico1.gif (135 bytes)Purity of Silicon Monoxide (SIO): We offer SiO with a purity of 99%, 99.9%, 99.95%, 99,99%. Typical analysis of 99% silicon monoxide is as lists below:

Typical Analysis for 99% Pure SiO Pieces

Fe max.100 ppm

Al max.100 ppm

Cu max.50 ppm

Ti max.50 ppm

Ca max.50 ppm

Mn max.50 ppm

Ni max.100 ppm

Mg max.100 ppm

 

pm_ico1.gif (135 bytes)Physical Properties of Silicon Monoxide (SIO):

Molecular Weight of SIO 44.09
Melting Point of Silicon Monoxide Sublimes
Crystal Structure of SIO Amorphous
Solubility of Silicon Monoxide Insoluble in water. Soluble in dilute hydrofluoric acid.
Density of SIO 2.13 to 2.18 g/cm3 (calculated)
Bulk Density of Powder Approx. 0.9 g/cm3
Evaporation Temperature 1100 to 1400°C
Transparent Region 0.45 to 7 microns

 

pm_ico1.gif (135 bytes)Forms and sizes available for silicon monoxide

Item No. Purity Description

HS-2001

99%, 99.9%, 99.95% min.

3-6 mm pieces

HS-2002

99%, 99.9%, 99.95% min

6-15 mm pieces

HS-2003

99.9%, 99.9%, 99.95% min.

15-20 mm pieces

 

pm_ico1.gif (135 bytes)Packing: We pack silicon monoxide (SiO) with plastic bottles, then into cartons.

As we use very special equipment and latest technology in production, we can offer reliable quality Silicon Monoxide at the lowest cost. Our products are now selling well in both domestic and overseas market. Please contact us if you are interested in our silicon monoxide (SiO) products.

 

Hengshui Silicon Monoxide Factory
Add: No.11 East Xinhua Road, Hengshui City, Hebei, China 053000
Tel:0086-318-2028059     Fax:0086-318-2020059
E-mail: yanli_lu@yahoo.com
Url:http://www.silicon-monoxide.com